No Colour Selected

Woodgard Rubbol

Deep down protection for all exterior wooden surfaces

Select a Colour

Size

1 L 5 L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Woodgard Rubbol is not a varnish - it will not flake, crack or disintegrate on timber.
It is based on proven international formulating experience which gives deep nourishing wood protection against extreme weather
It is not a paint and will not obliterate the wood. Woodgard Rubbol enhances the natural beauty of wood, highlighting the grain, and water repellent
It is a maintenance coating. Once the first coat has worn through, or after 6 – 12 months, simply apply another coat. Saves time and money
It is not sticky or difficult to apply. Flows on with a brush with little effort

Technical Information

Finish Low Sheen
Coverage Approx 10 m² per litre per coat
Recoatable 48 hours at 23ºC (significantly higher at the coast, and during cold, wet or humid conditions).
Thinning Brush- Apply in an even thickness and finish in the direction of the grain. Thin the first coat 50% with Mineral Turpentine to aid penetration on raw wood. Thin second coat 10% followed by the final coat un-thinned. Allow 48 hours (2 days) drying time between coats.
Composition Solvent-based

Product Features

International proven formulation
Enhances the natural beauty of the wood grain
Enriched with oils that seep into the wood

Product Description

Woodgard Exterior Rubbol is a penetrating wood dressing for the protection of all exterior wooden surfaces only

Application Description

Brush or conventional spray.

Technical & Safety Documentation

Ensure that surfaces are sound and free from dust, dirt, grease and oil. Surfaces must be thoroughly dry - no more than 12% moisture content. Do not apply during cold (below 10°C) or wet weather. Do not apply directly to bare metal surfaces – stop nail holes with wood filler. Do not apply to wet or damp timber. Do not attempt to apply so thickly as to form a film – this may blister, blanch or peel off. It is important to treat the end grain of timber to prevent moisture ingress. It is important to adhere strictly to Application Methods, and to allow adequate drying between coats. N.B. WOODGARD RUBBOL is not recommended for floors or decking.

Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.

Download Adobe Reader

Colour Range

Woodgard

Tips & Advice

1. Preparing the Surfaces

May be used on all exterior wooden surfaces such as windows, doors, barge boards, etc. where a durable water repellent dressing is required.
2. Cleaning

For clean up use Dulux Pre-Paint Brush Cleaner Degreaser or Mineral Turpentine

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator