Fast Plaster Primer

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • For interior and exterior use.
  • Protects the topcoat from alkali attack.
  • Can be over coated with decorative water based and solvent based topcoats.
  • Tolerates moisture of up to 30%, allowing early priming of newly plastered walls.
Technical Information
  • Finish Matt
  • Coverage Approx 7 to 8m² per litre per coat
  • Drying Time 2 hours (Drying times will be extended during cold, wet or humid conditions)
  • Recoatable Min: 18 hours. Max: 14 days at 23ºC. (Drying times will be extended during cold, wet or humid conditions.)
  • Thinning Thinning not recommended. Ready for use after thorough stirring.
  • Composition Solvent-based
Product Features
  • Reinforces adhesion and durability of the end coat
  • Quick drying

Product Description

Designed for early priming of newly plastered walls. Recommended for use as a primer for new interior and exterior
plastered walls. Also suitable for coating surfaces such as brick, concrete and other
masonry surfaces.

Application Description

Brush or roller. Brush is preferred to work the material well into the surface.

Surface Temperature between 10 - 35°C Relative Humidity between 10 - 85 %

Technical & Safety Documentation

For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children. Ensure good ventilation during application and drying. Non-flammable

System information

All surfaces must be sound, clean and as dry as possible –12% or below required for previously painted surfaces no more than 30% moisture content when used for early priming of new masonry surfaces. Do not apply during cold (below 10°C) or wet weather. Not suitable as a primer for metal surfaces. Polystyrene products e.g. cornice & mouldings should not be primed with Dulux Trade Plaster Primer. Prime with 1 coat Dulux Supergrip which is water based, 2 coats required if anon-solvent free enamel topcoat will be applied. Not suitable for direct application to powdery or friable surfaces whether previously painted or not.Not designed to withstand natural weathering. It should be over coated in 14 days

Tips & Advice

  • 1. Preparing the Surfaces
    Suitable for cement plaster, gypsum plaster,
    concrete, and other masonry surfaces
  • 2. Cleaning
    For clean up use DULUX PRE-PAINT BRUSH CLEANER/DEGREASER or Mineral Turpentine
Fetching the data, please wait...