Products
Products
Dulux Trade Fast Plaster Primer

Dulux Trade Fast Plaster Primer

Designed for early priming of newly plastered walls. Recommended for use as a primer for new interior and exterior plastered walls. Also suitable for coating surfaces such as brick, concrete and other masonry surfaces.

Size

5 L 20 L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

For interior and exterior use.
Protects the topcoat from alkali attack.
Can be over coated with decorative water based and solvent based topcoats.
Tolerates moisture of up to 30%, allowing early priming of newly plastered walls.

Technical Information

Finish Matt
Coverage Approx 7 to 8m² per litre per coat
Drying Time 2 hours (Drying times will be extended during cold, wet or humid conditions)
Recoatable Min- 18 hours. Max- 14 days at 23ºC. (Drying times will be extended during cold, wet or humid conditions.)
Thinning Thinning not recommended. Ready for use after thorough stirring.
Composition Solvent-based

Product Features

Reinforces adhesion and durability of the end coat
Quick drying

Product Description

Designed for early priming of newly plastered walls. Recommended for use as a primer for new interior and exterior
plastered walls. Also suitable for coating surfaces such as brick, concrete and other
masonry surfaces.

Application Description

Brush or roller. Brush is preferred to work the material well into the surface.

Surface Temperature between 10 - 35°C Relative Humidity between 10 - 85 %

Technical & Safety Documentation

For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children. Ensure good ventilation during application and drying. Non-flammable

Download Adobe Reader

System information

All surfaces must be sound, clean and as dry as possible –12% or below required for previously painted surfaces no more than 30% moisture content when used for early priming of new masonry surfaces. Do not apply during cold (below 10°C) or wet weather. Not suitable as a primer for metal surfaces. Polystyrene products e.g. cornice & mouldings should not be primed with Dulux Trade Plaster Primer. Prime with 1 coat Dulux Supergrip which is water based, 2 coats required if anon-solvent free enamel topcoat will be applied. Not suitable for direct application to powdery or friable surfaces whether previously painted or not.Not designed to withstand natural weathering. It should be over coated in 14 days

Tips & Advice

1. Preparing the Surfaces

Suitable for cement plaster, gypsum plaster,
concrete, and other masonry surfaces
2. Cleaning

For clean up use DULUX PRE-PAINT BRUSH CLEANER/DEGREASER or Mineral Turpentine

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator