Products
Products
Dulux Trade Corrocote 1 Metal Etch Primer

Dulux Trade Corrocote 1 Metal Etch Primer

Size

5 L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Suitable for interior & exterior use
Provides excellent adhesion
Fast recoating properties - recoat in 4 hours
Provides an excellent primed surface for coating with conventional paints and some heavy-duty coatings.

Technical Information

Finish Sheen
Coverage Approx 8m² per litre per coat
Drying Time 1 hour. Drying times will be extended during cold, wet or humid conditions)
Recoatable 4 Hours for Conventional Coatings, 48 Hours for Dulux Trade Hi-Chem Epoxy Enamel. (Drying times will be extended during cold, wet or humid conditions). Maximum over-coating time is 14 days.
Thinning Thinning not recommended. Brush - Ready for use after thorough stirring. Etch Primer Thinner if required for spraying to maximum of 10% of product volume.
Composition Solvent-based

Product Features

Anti-rust
Reinforces adhesion and durability of the end coat

Product Description

Dulux Trade Corrocote 1 Metal Etch Primer is a versatile primer for clean galvanised iron and non-ferrous metals.
May be used as a pre-treatment primer for new steel surfaces, which have been sand blasted to Sa2 minimum.

Application Description

Brush or conventional spray.

Technical & Safety Documentation

For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children Ensure good ventilation during application and drying. Flash Point 12ºC.

Download Adobe Reader

System information

Thinning not recommended. Brush - Ready for use after thorough stirring. Etch Primer Thinner if required for spraying to maximum of 10% of product volume. Not suitable for direct application to powdery or friable surfaces whether previously painted or not. Do not apply over rusty, unprepared metal surfaces. Quick drying - avoid application to very hot surfaces. Not designed to withstand natural weathering. Overcoat as soon as possible after the applicable recoating time, particular in coastal conditions.

Tips & Advice

1. Preparing the Surfaces

Suitable for galvanised iron, steel and all non-ferrous metals.
2. Cleaning

For clean up use ETCH PRIMER THINNER.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator