Corrocote 3 Metal Primer

Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Best available primer for galvanised iron surfaces, with excellent adhesion properties.
  • An excellent anti-corrosive primer for use over abrasive blast-cleaned steel (cleanliness standard Sa2½).
  • Can be over coated with most commercially used paints, both solvent- and water-based.
  • Quick drying, water based and low odour
  • Non-toxic and non-flammable
Technical Information
  • Finish Sheen
  • Coverage Approx. 10m² per litre per coat
  • Drying Time 1 hour
  • Recoatable 4 hours for water-based top coats 24 hours for conventional solvent-based top coats 48 hours for Dulux Trade Tuffote Expoxy Enamel
  • Thinning Thinning not recommended. Ready for use after thorough stirring. Potable water if required for spraying to maximum of 5% of product volume.*Note if diluted multiple coats will be required to achieve the required 35μm total dry film thickness.
  • Composition Water-based
Product Features
  • Anti-rust
  • Water based
  • Quick drying
  • Reinforces adhesion and durability of the end coat

Product Description

An excellent “travel” primer, being both quick drying and abrasion resistant.
Provides excellent adhesion and a good base for top coating

Application Description

Brush, roller or airless spray

Technical & Safety Documentation

For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children. Ensure good ventilation during application and drying. Toxic fumes if welded - wear positive pressure air-fed masks for welding Not a fire hazard, but must be stored above 5°C. Water-based material – not normally flammable.
Download Adobe Reader

System information

Thinning not recommended. Ready for use after thorough stirring. Potable water if required for spraying to maximum of 5% of product volume.*Note if diluted multiple coats will be required to achieve the required 35μm total dry film thickness. Do not apply over rusty unprepared metal surfaces. Quick drying - avoid application to very hot surfaces. Not suitable for use where surface temperatures exceed65°C. Thus may not be used as a primer under DuluxRoofguard, Rockgrip Acrylic Roof or Maxicover RoofCoat .Not designed to withstand natural weathering. Overcoat within one week particularly in a marine atmosphere.

Tips & Advice

  • 1. Preparing the Surfaces
    Suitable for clean galvanised iron, abrasive blast-cleaned steel and non-ferrous metals
  • 2. Cleaning
    Clean equipment immediately with water

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Corrocote 3 Metal Primer

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, please wait...